PMA-900HNE
Key Features
- 2-Channel Configuration
- 50W per Channel Power Output @ 8 ohms
- Wi-Fi, Ethernet, Bluetooth, and HEOS
- Works with Alexa, Siri, Google & Josh.ai
- 3 x Optical & 1 x Digital Coaxial Inputs
- 3 x Stereo RCA & 1 x Phono Input
- Stereo RCA Output
- Hi-Res Audio Support
- Front OLED Info Display
Play hi-res audio from your analog, digital, and streaming sources with the Denon PMA-900HNE 100W Integrated Network Amplifier. Utilizing high-grade audio components, a vibration-resistant design, and a high current output, the PMA-900HNE is able to drive 50W per channel at 8 ohms to your existing loudspeakers with minimal noise. In addition to analog and digital inputs, this amplifier provides a dedicated USB Type-A port, a phono input for direct turntable connection, and HEOS Built-In for wireless access to a nearly limitless digital library. You can connect to your network via Wi-Fi or wired LAN, or stream via Bluetooth or AirPlay 2 from a mobile device.
Voice Control
This network amplifier supports Amazon Alexa, Google Assistant, Apple Siri, and Josh.ai for convenient voice control over media access and playback.
Hi-Res Audio
Whether through your network, external drive, or mobile device, the PMA-900HNE is capable of playing a variety of Hi-Res Audio codecs. It supports ALAC, FLAC, and WAV lossless up to 24-bit/192 kHz, in addition to DSD at 2.8 and 5.6 MHz.
Additional Features
- Built-in phono equalizer for turntables with MM cartridges
- Roon Tested
- Headphone output
- Front control knobs for volume, input selection, bass, treble, and balance
- Front OLED info display
- Auto power off
What's in the box:
- Integrated amplifier
- 68" AC power cord
- Remote control (RC-1246)
- Two "AAA" batteries
- 2 WiFi/Bluetooth antennas
- uick Start Guide
- Spotify Connect Instructions
- Heos Brochure
- Safety Instructions
- Notes on Radio
- Warranty Information
- Bluetooth/WiFi antenna note
Specification
|
Amplifier
|
-
Amplifier Type:Integrated Amplifier (Preamp/Power Amp Combo)
-
Channels:2.1
-
Power Output per Channel:50 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD,85 W at 4 Ohms / 1 kHz / 0.7% THD
-
THD:0.01% (1 kHz, 8 Ohms, Rated Output -3 dB)
-
Speaker Impedance:Not Specified by Manufacturer
-
Tone Control:Bass (100 Hz): ±8.0 dB,Treble (10 kHz): ±8.0 dB
|
|
Audio Processing
|
-
Supported File Formats:2.8 MHz DSD, 5.6 MHz DSD, AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA via USB/Network
-
Supported Sample Rates:Up to 192 kHz / 24-Bit
|
|
Connectivity
|
-
Rear A/V Inputs:3 x Optical TOSLINK,1 x Digital Coaxial,3 x Stereo RCA,1 x Stereo RCA (Phono MM) with Ground Screw,1 x USB Type-A
-
Rear A/V Outputs:1 x Stereo RCA Recorder,1 x RCA Subwoofer Pre-Out
-
Front I/O:1 x 1/4" / 6.35 mm Headphone Output
-
Other Rear I/O:1 x RJ45 (Ethernet) Input
-
Speaker Connectors:4 x Binding Post Pairs
-
HDCP Support:None
-
Media Card Slot:None
-
A/B Speaker Selection:Yes
-
Input Impedance:40 Kilohms (Source Direct Off)
-
Input Sensitivity:105 mV (High)
-
Signal to Noise Ratio:105 dB
|
|
Wireless Connectivity
|
-
Wi-Fi:Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac); Dual-Band (2.4 & 5 GHz)
-
Bluetooth:Yes
-
Wireless Audio Protocols:AirPlay 2, HEOS, Roon Ready
|
|
Control
|
-
Virtual Assistant:Works with Alexa, Works with Google Assistant, Josh.ai, Siri
|
|
Power
|
-
AC Input Power:Not Specified by Manufacturer
-
Power Consumption:Active: 200 W,Standby: 0.2 W
|
|
Physical
|
-
Dimensions (W x H x D):17.1 x 5.2 x 14.8 Inch , 434.0 x 131.0 x 376.0 mm
-
Weight:18.3 lb / 8.3 kg
|
|
Packaging Info
|
-
Package Weight:22.735 lb
-
Box Dimensions (LxWxH):20.1 x 18.8 x 10.2"
|
